Leuchtkraft DMX-3216 Manual De Instrucciones página 17

MANUAL: manual retrieval of the individual
program steps by means of the
buttons  and  (13)
9 Status LEDs to indicate the assignment
( ASSIGN) and the reversal (REVERSE) of the
channels for movement control of a light
effect unit
10 Button PROGRAM / REC to save a program
step; to activate or deactivate the program-
ming mode, keep the button pressed for 3 s
The LED next to the button will start to flash
when the programming mode has been
activated .
11 LC display
12 Button INSERT (with status LED) to sub-
sequently insert or delete program steps
13 Buttons  and  to select a program step
during manual replay and while a program is
being edited; additional functions are avail-
able when the buttons are pressed together
with other buttons:
 + MODE (20) – to save programs on a
 + MODE (20) – to load programs from a
 + MIDI IN (14) – MIDI control on / off
When setting up the channels for movement
control, use the buttons to select the move-
ment direction (PAN/TILT) to be assigned .
14 Button MIDI IN
To activate and deactivate MIDI control, press
the button together with the button  (13) .
The LED next to the button will light up when
the controller can be controlled by means of
MIDI signals .
15 Button TAP
When a program (CHASE) is being replayed in
the mode AUTO, the button TAP can be used
to define the replay speed . Press the button
TAP twice .
To adjust the MIDI channel, keep the button
pressed for 3 s; the LED above the button will
start to flash . To complete the adjustment,
keep the button pressed for 3 s again .
16 Button BLACK OUT
Press the button briefly to temporarily set the
value for all DMX addresses to zero . The LED
USB storage device (keep
pressed for 3 s)
USB storage device (keep
pressed for 3 s)
will light up . Press the button again to provide
the addresses with their previous values; the
LED will extinguish .
If the button is pressed for 3 s, the output of
the DMX signal will be interrupted; the LED
above the button will start to flash . Press the
button briefly to deactivate the interruption .
17 Depending on the current operation mode,
the number buttons 1 – 16 can be used to
select the light effect units (FIXTURE), the
programs (CHASE) or a movement pattern
(MOVEMENT) .
18 Button FINE to change the precision of the jog
wheels PAN (19) and TILT (22) for movement
control: When the LED next to button lights
up, fine adjustments of the movement in steps
of 1 can be made .
When combined with the button MODE (20),
the button FINE can be used to assign or reverse
the movement channels,
19 Jog wheel PAN to control the pan movement
When the movement channels are being as-
signed, the LED above the jog wheel will light
up if PAN has been selected .
20 Button MODE to copy the adjustments of a
light effect unit for another light effect unit;
the button provides additional functions when
combined with other buttons
21 Button DEL; depending on the operation
mode, to delete scenes, programs or program
steps . During setup of the movement chan-
nels: in combination with the button MODE
(20), to delete the assignment or the reversal .
22 Jog wheel TILT to control the tilt movement
When the movement channels are being as-
signed, the LED above the jog wheel will light
up if TILT has been selected .
23 Button RELEASE / CLEAR; to set the values for
all DMX addresses to zero and, when scenes,
programs or movement patterns are being
called up, to return the control of manually
changed channels to the scene, program or
movement pattern
24 Control WAIT TIME / M-RANGE to adjust the
step duration to be used when programs are
being called up, and to adjust the excursion
of the movement when movement patterns
are being called up
When adjusting the MIDI channel, to select
the channel desired [
status LEDs (9) .
☞
☞ button TAP (15)] .
17