Publicidad
Idiomas disponibles
Idiomas disponibles
To
Turn on the power
Adjust the volume
Select a source
Change the display information
Getting Started
1
Select the display language, acknowledge the
crossover type and cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES]), the display shows: "SEL LANGUAGE" "PRESS" "VOLUME KNOB"
1
Turn the volume knob to select [EN] (English) / [RU] (Russian) /
[SP] (Spanish) / [FR] (French) / [GE] (German), then press the knob.
[EN] is selected for the initial setup.
Then, the display shows: "2-WAY X ' OVER" or "3-WAY X ' OVER" "PRESS"
"VOLUME KNOB" "TO CONFIRM".
Press the volume knob to acknowledge the current crossover type.
2
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB".
Press the volume knob again.
3
[YES] is selected for the initial setup.
Press the volume knob again.
4
"DEMO OFF" appears.
2
Set the clock and date
1
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [CLOCK], then press the knob.
2
8
On the faceplate
Press B SRC.
• Press and hold to turn off the power.
Turn the volume knob.
Press B SRC repeatedly.
Press DISP repeatedly.
To adjust the clock
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
3
Turn the volume knob to make the settings, then press the knob.
4
Set the time in the order of "Hour" "Minute".
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
Turn the volume knob to select [12H] or [24H], then press the knob.
6
To set the date
Turn the volume knob to select [DATE FORMAT], then press the knob.
7
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
8
the knob.
Turn the volume knob to select [DATE SET], then press the knob.
9
Turn the volume knob to make the settings, then press the knob.
10
Set the date in the order of "Day" "Month" "Year" or "Month" "Day"
"Year".
Press and hold
to exit.
11
To return to the previous setting item, press
3
Set the other optional settings
You can only set the following items while the unit is in STANDBY source.
Press B SRC repeatedly to enter STANDBY.
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (page 9), then press the
3
knob.
4
Repeat step 3 until the desired item is selected or activated.
Press and hold
to exit.
5
To return to the previous setting item, press
.
.
Publicidad
