Publicidad
Idiomas disponibles
Idiomas disponibles
A) Control panel: it is equipped with the control devices needed to operate the appliance
(see "Control descriptions").
B) Cook plate: it is made of cast iron with non-slip surfaces.
C) Gas supply fitting: used to connect the gas supply
TECHNICAL SPECIFICATIONS
Table 1: Technical appliance specifications
Description
Power
Supply type
Quantity of energy consumed
Gas consumption (LPG)
Gas consumption (methane)
Appliance dimensions
Cook surface dimensions
Packaging dimensions
Net weight
Installation type
CONTROL DESCRIPTIONS
The appliance is equipped with the listed
control devices, required to run its main
functions.
A) Burner control knob: used to turn on,
off and adjust the relevant burner and
pilot flame.
B) Piezoelectric switch: used to ignite the
pilot flame.
RECOMMENDATIONS FOR USE
1 - Press and rotate the knob (A) counter-
clockwise (pos. (C)) and simultaneous-
ly press the piezoelectric switch (B) re-
peatedly to ignite the pilot flame.
2 - Hold down the knob for about 10 sec. to trigger the thermocouple.
3 - Rotate the knob (A) clockwise to set flame power.
4 - Place food products on the cook surface.
5 - Use specific utensils to remove food from the cook plate when cooked.
Unit of
CR400G1
measure
kW
3,6
kcal/h
3600
kg/h
0,49
m³/h
0,67
mm
430x480x270
mm
ø 400
mm
530x530x330
kg
23
- 11 -
CREPE MACHINE
(GAS POWERED)
CR400G2
METHANE Gas - LPG
7200
900x480x270
2 x ø400
960x540x450
Counter installation
C
B
A
English language
7,2
0,98
1,34
GB
46
Publicidad
