Publicidad
Idiomas disponibles
Idiomas disponibles
Caring for Your Steam Mop
AFTER USE AND STORAGE
1
Press the Steam Control Button until the Steam Mop
returns to Standby Mode. Unplug the cord from the
outlet and place the Steam Mop into the upright
position. Let it cool.
2
If you have been using the Handheld Steamer,
reattach it to the Mop Handle.
3
Remove the Pocket Pad from the Mop Head by
undoing the hook-and-loop closure and using the
loop on the side to pull it off the Mop Head, avoiding
contact with the hot Pocket Pad.
19
1-800-798-7398
fig. 13
4
Empty the Water Tank before storing. Open the
Water Tank Cap and empty the Tank in a sink. Close
the Cap.
5
To store the Steam Mop hanging up, first remove
the Mop Head (after it has cooled and the steam
has been released), then hang on a large hook (not
included) (fig. 13).
fig. 14
POCKET PAD CARE INSTRUCTIONS
Care
Before washing, close the hook-and-loop fasteners so they
won't snag on the Pocket Pads. Machine wash the Pocket
Pads separately with warm water using liquid detergent.
NEVER USE BLEACH, POWDERED DETERGENT, OR
FABRIC SOFTENERS as they may damage or leave a
coating on the Pocket Pads that will reduce their cleaning
performance and absorbancy. Pocket Pads should be
line-dried or tumble-dried on a low setting, as this will
extend the life of the microfiber fabric (fig. 14).
Loose fibers can indicate wearing of the microfiber
fabric. Do not pull the loose fibers as this can cause the
weave to come undone. Simply trim the loose fibers with
scissors (fig. 15).
fig. 15
Replacement Pocket Pads
For best cleaning results, we recommend replacing your
Pocket Pads every 3 to 4 months following normal use.
As with any fabric, dirt particles, grease, friction, and
repeated washing can cause the fibers to break down, and
you may notice an increase in the effort needed to push or
pull the Steam Mop.
You can purchase replacement Pocket Pads and
Accessories by visiting www.sharkclean.com or calling
1-800-798-7398.
STEAM NOZZLE CARE
If you believe the Steam Nozzle or the Direct Steam
Nozzle is clogged, please contact Customer Service at
1-800-798-7398 or consumer-services@sharkninja.com.
www.sharkclean.com
EN
20
Publicidad
