Descargar Imprimir esta página

Beurer FC80 Instrucciones De Uso página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
5. Initial use
Unpacking the device
Warning!
Keep packaging material away from children!
There is a choking hazard.
> Open the cardboard packaging
> Remove the ultrasound device with
transparent cover, the charger and the
cable with the power supply unit
> Check all parts for damage
Installation location
Warning!
• Before using the device for the first time,
read the safety notes in the Safety chapter.
w Safety pages 10 to 11
• Ensure that the mains cable does not pose
a trip hazard.
> Insert the mains cable plug into the
charger
> Place the charger on a smooth, level
surface
> Plug the power supply unit into a mains
socket
Charging the battery
> Place the device in the charger
The red LED lights up; this means that the
charging process has begun and the battery
is being charged.
6. Operation
Warning!
• Before using the device for the first time,
read the safety notes in the Safety chapter.
w Safety pages 10 to 11
Caution!
• If you experience irritations of any kind,
stop treatment immediately.
• When using the ultrasound device for the
first time, or if you have sensitive skin,
reduce the treatment time.
The entire charging process takes around
3 hours for the first charge or whenever the
device has not been used for a relatively long
time. When the device has been in regular
use, charging takes around 2 hours.
The red LED goes out as soon as the
charging process has finished.
Important!
To ensure the long life of your battery, the
device should always be fully discharged
before being fully recharged (takes around
2 hours).
Checking that the ultrasound is
working
Check that the ultrasound head is working.
> Carefully let a few drops of water drip onto
the ultrasound head
> Switch on the device using the On/Off
switch
If the drops of water vibrate, the device is
working.
Important!
• Clean your face thoroughly before
treatment.
• Use only water-based gels and skincare
products. Oily skincare products do not
support the function of the ultrasound
device.
• Check whether your skin tolerates the
skincare product/contact gel you are
using.
13

Publicidad

loading