Figure 1
Figure 2b
Sear Burner Knob
Sear Burner
Igniter Lead
Black
Wire
White
Wire
Black
Wire
LED Light
Lead
White
Wire
Figure 2a
Figure 3
Figure 4
Bezel
Step 15
Insert sear burner valve tip into
the sear burner orifi ce (fi gure 1).
Insert the pre-attached bolts in
the sear burner valve assembly
through the keyholes in the sear
burner front panel (Figure 2a & 2b).
Rotate the burner valve assembly
counter-clockwise in the keyholes
on the sear burner bezel as shown
to lock in place (Figure 3). Tighten
with screwdriver. Then install the
sear burner knob onto valve stem
(Figure 4).
Step 16
Connect the sear burner igniter lead
wire to the electrode on the sear
burner as shown. Attach sear burner
LED light wire to the LED light lead
coming from grill body. Be sure to
align white wires with each other and
black wires with each other.
26