Operating instructions
Drying Cycles-Sensor cycles automatically determine fabric dryness.
D
Timed cycles run for the selected time.
Timed Dry
Air Fluff/
No Heat
Speed Dry
Bulky Items
Towels/Sheets*
Cottons*
Mixed
Loads*
Jeans*
Casuals/
*
EasyCare
Active Wear
Delicates
Steam Refresh
Steam Dewrinkle
Steam Select
Steam Cycle Notes:
• Important - The temperature setting must be set to HIGH and water must be turned on before running the steam cycles.
• The Extended Tumble option will be turned on.
• After the steam cycle, the unit will beep (if Volume is on) and display "00".
• Do not use a steam cycle with items such as wool, leather, silk, lingerie, foam products or electric blankets.
• Do not use steam cycles on new clothes without first washing.
• Steam cycles are not intended for use with towels.
Sanitize
*Cycles available with Sanitize option.
Settings
E
Individual settings for Timed Dry cycle minutes (Time), dryness level (Level), and temperature (Temp) can be set from
the minimum (lowest in column) to maximum (highest in column). In general, the higher up the column, the more
energy will be used.
- Selection
Time
- Selection only used for
Dryness Level
Extra Dry
More Dry
Dry
Less Dry
Damp
6
Set the Cycle Selector at the desired drying time.
For freshening or fluffing up already dry clothing, fabric, linens and pillows. Use with No Heat.
Provides 10 minutes of no-heat tumbling.
For small loads that are needed in a hurry, such as sport or school uniforms. Can also be used if the
previous cycle left some items damp, such as collars or waistbands. NOTE: On some models, the time
remaining in the cycle will show counting down in the display.
For large coats, bed spreads, mattress covers, sleeping bags and similar large/bulky items such as
blankets, comforters, jackets, and small rugs.
For most towels and linens.
For cottons and most linens. Note: E
For loads consisting of cottons and poly-blends.
For jeans.
For wrinkle-free, permanent press, delicate items and knits.
For sports and exercise wear.
For delicate items, special-care fabrics and knits.
For slightly wrinkled dry garments. Significantly reduces wrinkles.
NOTE: A single extremely light fabric item may need to have an additional item included in
the Steam Refresh cycle to achieve optimum results.
For use with larger loads than Steam Refresh. Ideal for loads left in the dryer for an extended time.
The Steam Select button is used in conjunction with Steam Refresh and Steam Dewrinkle. As you
press the button, it defines how many articles are in the dryer and adjusts the steam and cool down
times accordingly.
This option reduces certain types of bacteria by 99.9%, including: Staphylococcus aureus, Pseudomonas
aeruginosa and Klebsiella pneumoniae. The anti-bacterial process occurs when high heat is used
during a portion of the drying cycle.
NOTE: Do not use this cycle on delicate fabrics.
only for Timed cycles.
Each "setting" allows you to specify a lower (1 tap) or an upper (2 taps) time working your way from a
minimum 10 minute to a maximum 99 minute dry time (10, 20, 30, 40, . . . 80, 90, 99, 10 . . .)
Use for heavy-duty fabrics or items that should be very dry, such as towels.
Use for heavy-duty or mixed type fabrics.
Use for a normal dryness level suitable for most loads. This is the preferred cycle for energy savings.
Use for lighter fabrics.
For leaving items partially damp.
S
models are tested on Cottons with default settings.
®
NERGY
TAR
Sensor cycles. Timed cycles run for the selected time.