Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
1.
If the silent pause time between each track is longer than
3 minute, the platter will stop spinning automatically to avoid
damaging the record. The indicator light will be red. To resume
operation, press the START button.
2.
If the felt mat gets dirty, it can easily scratch the record, so remove
the felt mat periodically and wipe off any dust.
3.
To prevent the record from scratches and warping, remove it after
use.
4.
Do not use a disk stabilizer.
AUX-IN Operation
This turntable includes an auxiliary audio signal input jack for
connecting external audio devices like MP3 players, CD players, and
older, non-dockable iPods so you can listen to your external source
through the turntable's speakers.
1.
Use an audio cable (not included) with one 3.5 mm stereo
connection on each end of the cable.
2.
Plug one end into the AUX-IN jack on the turntable and the other
end to the Line Out jack of the audio device.
3.
Power on the turntable and audio device. The indicator light of
turntable is red.
4.
Press the MODE button again, the indicator light of turntable
turns green. It's AUX-IN mode.
5.
The volume level can be controlled through the turntable.
Operate all the functions on the auxiliary device as usual.
NOTE:
1.
Make sure the tone arm is securely locked to avoid any damage.
When you are done, don't forget to turn off the power on the
2.
turntable and your external device.
18
Publicidad
