One for All URC6131NOM Guia Del Usuario página 5

KEY CHARTS
blinks, the remote control
is working and (after
programming) is sending
signals.
Press TV, PVR, DVD, CBL/SAT,
AUD, or VCR once to select a
desired home
entertainment device to
control. Also see the
Press POWER once to turn
on or off the selected
device. For master power
control, see "Programming
Press MENU once to display
your selected device's main
menu. For PVR/DVRs, use
Use INFO to display the
current channel and
program information.
Use GUIDE to display your
selected device's program
guide or setup menu.
Use EXIT to exit from your
selected device's guide or
menu.
Use the Cursor Keys to move
the cursor in the program
guide and menu screens.
Use OK to choose options
from your selected device's
menu or guide.
In the AUD mode, use
SELECT to set the surround
sound.Use
) to adjust the
volume higher (or lower).
Use (or
the balance left (or right).
(or
) to adjust
Owner's Manual
Use VOL + (or VOL -) to
raise (or lower) the sound
volume.
Use CH + (or CH -) to select
the next higher (or lower)
channel.
Press MUTE once to turn the
sound off or on.
Use to command your
PVR/DVR to instantly
replay the last 7 seconds of
a program you are viewing.
Press PREV once to recall
the last viewed channel and
to page back one screen on
the main menu.
In the AUD mode, use PREV
to select the receiver band.
Use or to perform
the Thumbs Down or
Thumbs Up feature on your
Tivo/ PVR/DVR device.
Press PVR MENU once to
turn the PVR/ DVR's main
menu on or off.
Use to command your
PVR/DVR to skip or
advance through a
recorded program scene or
commercial.
Use the Transport Keys to
control your VCR, PVR/
DVR, DVD player, or VOD
(Video On Demand) if
available on your cable or
satellite service.
Press REC twice to record a
PVR/DVR or VCR
program.
Use AUDIO to select an
alternate audio channel (e.
3