One for All URC6131NOM Guia Del Usuario página 8

One For All 6-Device PVR Universal Remote Control
PROGRAMMING DEVICE CONTROL
The One For All 6-Device PVR Universal
Remote Control (URC-6131n) is
preprogrammed at the factory to operate
an RCA TV, VCR, and satellite receiver, a
Philips Tivo PVR/DVR, a Toshiba DVD
player, and a Pioneer audio receiver/
amplifier. To control devices other than
the default brands, perform the following
steps; otherwise skip this section.
NOTE: For DVD Player/VCR Combo
control, see the next section.
1. Turn on a desired device (e.g., VCR
or DVD player) and, if applicable,
insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4
completely before proceeding. Highlight or
write down the codes and device you wish
to program before starting step 2.
2. On the remote control, press a device
key once (i.e., TV, PVR, DVD, CBL/SAT,
AUD, or VCR).
NOTES
To program control of a cable box or
satellite receiver, press CBL/SAT once.
To program control of a CD player or
audio receiver, press AUD once.
To program control of a TV/VCR Combo,
press VCR once. After programming, you
will be able to control channel selection,
volume, and VCR functions.
To program control of a TV/DVD
Player Combo, press DVD once. After
programming, you will be able to control
channel selection, volume, and DVD
functions.
3. Press and hold SET
light) blinks twice, then release SET.
page 27) to locate the type of device
and brand name and then enter the
first four-digit code for your device.
blink twice.
6
NOTE:
repeat steps 2 through 4 and enter the
same code again.
5. Aim the remote control at the device
and press POWER once. The device
should turn off. If it does not, repeat
steps 2 through 5, trying each code
for your brand until you find one
that works. If it still doesn't work, try
NOTE: If the device does not have a POWER
(PLAY
6. Repeat steps 1 through 5 for each
device you want to control. For future
reference, write down each working
device code in the following boxes:
TV Code:
Brand Name:_____________________
PVR Code:
Brand Name:_____________________
DVD Code:
Brand Name:_____________________
CBL/SAT Code:
Brand Name:_____________________
AUD Code:
Brand Name:_____________________
VCR Code:
Brand Name:_____________________
PROGRAMMING
DVD PLAYER/ VCR COMBO
1. Turn on the DVD Player/VCR
Combo and insert a DVD.
NOTE: Please read steps 2 through 4
completely before proceeding. Highlight or
write down the codes and device you wish
to program before starting step 2.