hillvert HT-IRI-08 Manual De Instrucciones página 22

Dial position
„RUN"
„SET CLOCK"
„START TIME"
„HOW LONG"
„HOW OFTEN"
„OFF"
+/- button (to increase/decrease the parameter value)
•
Pressing the appropriate button increases or decreases the value for a given
parameter. Holding the button pressed down causes a faster parameter value
change.
The button switches between the left (L) or right hand-side (R) valve.
•
With the dial in the START TIME/HOW LONG/HOW OFTEN position, or when
manual watering is selected, press the "L/R button to choose the valve to which
the function applies.
Activation/deactivation of manual watering control
•
With the function knob in the RUN position, press the manual control button to
turn on continuous watering for 2-240 minutes, regardless of the programmed
operating mode.
3.3.2 Programming automatic control
Clock setting
•
Set the timer function selector to the SET CLOCK position, and use the value
increase/decrease buttons to set the correct time.
Description of the function
Settings saved, timer active - the device works according to
the saved schedule
Clock time setting
Set Watering Start Times (00:00 - 23:59)
Set Watering Duration (10 seconds to 360 minutes)
Watering frequency setting (seconds/minutes/hours/days)
Timer inactive, device off