Honeywell HPA030B Manual De Instrucciones página 3

INSTALLING TRUE HEPA FILTERS AND ODOR REDUCING PRE-FILTER
The True HEPA Filters and Odor Reducing Pre-filter are supplied with your air purifier. They are wrapped to ensure
purity and are labeled to help identify the proper replacement filter Type
Reducing Pre-filter).
• Turn off and unplug the air purifier. While pressing the notch at the top of
the rear grille, pull the grille towards you and remove it (See Fig. 2). Gently
push along the edge of the filter frame and pull forward. If replacing used
filters, you may pull the red tabs to remove the filter. Repeat for the second
filter.
• Remove protective wrap from the filters, including the pre-filter.
• Place the True HEPA filters back into the air purifier housing with the red
tabs accessible for removal.
• Secure the Odor Reducing Pre-filter under the tabs on the rear grille.
• Re-install the rear grille by inserting the lower tab into tab slot at the
bottom of the air purifier. Push the top of grille into place until you hear an
audible "click."
OPERATION
• Ensure the air purifier is plugged into a working
electrical outlet.
• Press the power button (
high speed (Fig. 3).
• Press the power button again to select a different
cleaning level. An LED will illuminate to indicate which
cleaning level you have selected.
(III = High, II = Medium, I = Low)
Portable air purifiers are more effective in rooms
where all doors and windows are closed. It is recommended
that you run your air purifier while you are at home to help
clean the air.
ENERGY STAR
®
This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by the U.S.
EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air from the use of
this product.
The energy efficiency of this ENERGY STAR® qualified model is measured based on a ratio between
the model's CADR for Dust and the electrical energy it consumes, or CADR/Watt.
) once. The unit will start at
True HEPA Filter, Type
Fig. 3
3
Odor
A
R
Fig. 2
A
R