Publicidad
Pasos
1. Connect the display cable to the connector on the display panel and close the latch.
2. Adhere the conductive tape to secure the display cable to the display panel.
3. Close the display panel and the display back cover to assemble.
NOTA:
Ensure that the display panel tabs are inserted into the slots on the display cover.
4. Replace the four screws (M2.5x3.5) to secure the display panel to the display back cover.
Siguientes pasos
1. Install the
display
bezel.
2. Install the
display
assembly.
3. Install the
WLAN
card.
4. Install the
4G WWAN card
5. Install the
base
cover.
6. Install the
SIM
card.
7. Follow the procedure in
110
Extracción e instalación de unidades reemplazables en campo (FRU)
or
5G WWAN
card, as applicable.
After working inside your
computer.
Publicidad
