Publicidad
Requisitos previos
If you are replacing a component, remove the existing component before performing the installation process.
Sobre esta tarea
The following image(s) indicate the location of the fan and provides a visual representation of the installation procedure.
Pasos
1. Align the screw holes on the fan with the screw holes on the palm-rest assembly.
2. Replace the two screws (M2x4) that secure the fan to the palm-rest assembly.
3. Route the fan cable through the routing guides on the palm-rest assembly.
4. Connect the fan cable to the system board.
Siguientes pasos
1. Install the
base
cover.
2. Install the
SIM
card.
3. Follow the procedure in
66
Extracción e instalación de unidades reemplazables por el cliente (CRU)
After working inside your
computer.
Publicidad
