Publicidad
Idiomas disponibles
Idiomas disponibles
When using a nylon cutting head (bump & feed
type)
The nylon cutting head is a dual string trimmer head
provided with a bump & feed mechanism.
To feed out the nylon cord, tap the cutting head against
the ground while rotating.
► 1. Most effective cutting area
NOTICE:
The bump feed will not operate prop-
erly if the nylon cutting head is not rotating.
NOTE: If the nylon cord does not feed out while
tapping the head, rewind/replace the nylon cord
by following the procedures in the section for the
maintenance.
Chisel blade
CAUTION:
Never cut trees larger than 70 mm
(2-3/4") diameter.
The chisel blade is useful for cutting shrubs and trees.
To avoid kickback, always apply the segment of the
chisel blade between 8 and 11 o'clock to a tree.
1
► 1. 8 to 11 o'clock segment of the blade
For ease of cutting a tree, support the protector against
the tree stem as illustrated.
1
Shredder blade
CAUTION:
than your waist height.
CAUTION:
stroke with the cutting tool other than the shred-
der blade.
Shredder blade is useful for cutting open a dense bush
and shredding grass. Swing the tool head up and down,
or left and right onto the bush.
18 ENGLISH
Never raise the tool head higher
Never perform up-and-down
Publicidad
