Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
2. Remove the comb attachment.
3. Detach the blade cartridge.
4. Pry the decorative panel off the top housing to expose the internals and printed circuit
board.
5. Unscrew the 2 screws on the big printed circuit board and 3 screws on the small printed
circuit board.
6. Remove the battery and printed circuit board assembly from the battery chamber.
7. Disconnect the battery from the circuit board.
•
The battery must be disposed of at an appropriate official recycling/collection point.
•
Do not attempt to operate the trimmer once you have opened it.
RECYCLING
W
8
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
Publicidad
