GreenWorks Pro ST80B00 Manual Del Operador página 3

1 Description......................................... 4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
1.3 Packing list........................................................ 4
2 Important safety instructions...........4
3 Symbols on the machine................... 5
4 Risk levels...........................................6
5 Service................................................ 6
6 Environmentally safe battery
disposal............................................... 6
7 Proposition 65.................................... 6
8 Installation......................................... 7
8.1 Unpack the machine.......................................... 7
8.2 Attach the edge guide........................................ 7
8.3 Attach the guard.................................................7
8.4 Assemble the shaft.............................................7
8.5 Attach the auxiliary handle................................8
8.6 Install the battery pack.......................................8
8.7 Remove the battery pack................................... 8
9 Operation........................................... 8
English
9.1 Start the machine............................................... 8
9.2 Stop the machine............................................... 8
9.3 Adjust the length of the cutting line.................. 8
9.4 Line cut-off blade.............................................. 9
9.5 Adjust the cutting diameter................................9
9.6 Operation tips.................................................... 9
9.7 Cutting tips........................................................ 9
10 Maintenance.....................................10
10.1 General information.........................................10
10.2 Clean the machine........................................... 10
10.3 Remove excess line......................................... 10
10.4 Install the cutting line...................................... 10
10.5 Replace the bump knob....................................11
11 Transportation and storage............ 11
11.1 Move the machine............................................11
11.2 Store the machine.............................................11
12 Troubleshooting............................... 12
13 Technical data.................................. 12
14 Limited warranty............................ 13
15 Replacement parts...........................14
3
EN