Sylvania LD320SS1OM Manual Del Usuario página 16

P
REPARATION
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
[PC Connection]
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug conversion cable as well.
If you connect this unit to your PC, you can use this unit as a PC monitor.
e.g.)
personal computer
The following signals can be displayed:
Format Resolution
VGA
SVGA
XGA
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
Cable Management g
Keep the cables through this holder to avoid tangle
them.
14 14
EN
stereo mini plug
conversion cable
DVI OUT
HDMI-DVI conversion cable should be with ferrite core.
Refresh rate
640 x 480 60Hz
800 x 600 60Hz
1,024 x 768 60Hz
rear of this unit
To HDMI1 To HDMI1
input jack only input jack k only
HDMI-DVI HDM HDMI D DMI- V DV
conversion cable conversi o ver o on ca cab bl
Format
WXGA
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged
to an AC outlet after all the necessary connections are
completed.
AC outlet
Caution:
• Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of
this range may result in fire or electrical shocks.
Note:
• Each time you plugged in the AC power cord, any operations
will not be performed for a few seconds.
This is not a malfunction.
rear of this unit
Resolution Refresh rate
1,280 x 768 60Hz
1,360 x 768 60Hz
rear of this unit
AC power cord