Publicidad
Idiomas disponibles
Idiomas disponibles
Settings
SOS numbers: when the watch user presses and holds the SOS button, the watch makes an
automatic emergency call to three contacts defined on list.
Voice monitoring: enter the phone number to be called from the watch in order to listen to its
surroundings. Pick up the call and check what's happening nearby. The user of the watch has
no notification that such a call has been made.
Do not disturb: Select the time during the day when the user of the watch will not receive
phone calls.
Location mode: select normal mode - refreshing the watch's location once every ten minutes,
power saving - once every hour, tracking - once every minute.
SMS notifications: enter the number to which you want to receive SMS notifications about
events such as: low battery level in the watch, triggering the SOS alarm using the watch button.
Phone book: Define up to ten contacts that the watch user will have in the phone book.
Time zone: set your time zone than the device shows the correct date and time on.
Language: Choose language for your device from the available.
Settings switch: Enable or disable the watch function.
LBS Location: Enable or disable location using network operators antennas.
Turn off watch remotely: watch will be turned off.
The availability of the app functions depends on the watch model you are using.
FAQ
The application does not receive commands and shows information that the watch is
disconnected from the network.
– Check whether GMS signal is correct– whether the range columns are available / visible on
the display. - - - If they are crossed out, please turn off your watch.
Check if the SIM card is properly installed in the watch, if it supports 2G internet and if there is
an internet data package available.
Turn on the device. If the range columns are still crossed out, go to the next point.
- Check if there are data transfer arrows, if not, set APN (Access Point Name - specific packet
network, e.g. internet):
Please send a text message to the number of the watch with the content:
pw,123456,apn,YYYYY,,,XXXXX#
* the X characters represent the digits of the MNC and MCC codes assigned to a specific operator, e.g .:
26003 – ORANGE
26001 – PLUS
26006 – PLAY
26002 – T-MOBILE
the remaining code digits are available on manual/forever.eu or www.mcc-mnc.com/
* Instead of Y characters, enter the operator's individual APN name.
After sending the message, wait several minutes for KidsWatch to download the settings from
the network. Data transfer arrows will appear.
- Please send a text message to the number of the watch with the content: pw,123456,ts#, in
response, the watch will send us the parameters of the watch. An example:
7
Publicidad
