Publicidad
Idiomas disponibles
Idiomas disponibles
CP 77132 CP 87132
TOOLS AND MATERIALS REQUIRED
Philips screwdriver
‐
Blade screwdriver
‐
Adjustable pliers or wrench
‐
Step ladder
‐
Wire cuttler
‐
Electrical tape
‐
INSTALL MOUNTING BRACKET
1. Mount the mounting bracket onto outlet
box by the 2 screws. Spring washers and
flat washers.
2. Hang the ball joint and the fan onto the
bracket. Make sure the guied pin of
bracket is fitted into slot of ball joint.
5. Connect wires from supply and the
bracket to the wiring terminals as follow :
Brown wire
« L »
Blue wire
« N »
Green/yellow stripes wire « Θ ».
3. Insert the remote control receiver
between
the
bracket
and
downrod. And the sensor as shown.
6. Fix conopy onto the bracket by
tightening the screws.
the
12
Publicidad
