Descargar Imprimir esta página

Hansgrohe AXOR Citterio E 36413001 Instrucciones De Montaje / Manejo / Garantía página 2

Publicidad

English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - 36413xx1
handshower
tub spout
4.8 GPM (18.2 L/min) @ 44 PSI
Flow rate - 36411xx1
handshower
tub spout
4.8 GPM (18.2 L/min) @ 44 PSI
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• This trim kit requires rough valve 15460181 (not
included).
• Protection against backflow is provided by a
check valve in the handshower hose and by an
automatically resetting diverter.
• This thermostatic mixing valve is for use with shower
heads rated at 2.0 GPM (7.6 L/min) or higher.
2
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.75 GPM (6.6 L/min)
2.0 GPM (7.6 L/min)
• 36413xx1 only: This handshower is for use with
automatic compensating valves rated at 1.3 GPM
(4.9 L/min)or less.
• 36411xx1 only: This handshower is for use with
automatic compensating valves rated at 1.5 GPM
(5.7 L/min)or less.
• To guarantee the reliable function and smooth
movement of the thermostatic cartridge, occasionally
turn the thermostat from total hot to total cold.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.

Publicidad

loading

Este manual también es adecuado para:

Axor citterio e 36411001