Bosch GKS 65 G Professional Manual Original página 16

16 | English
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for making straight cuts in wood
with and against the grain and mitre cuts in wood while rest-
ing firmly against the workpiece.
The power tool must not be used to cut ferrous metals.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Lock-off button for on/off switch
(3) Speed preselection thumbwheel (GKS 65 GCE)
(4) Auxiliary handle (insulated gripping surface)
(5) Spindle lock button
(6) Scale for mitre/bevel angles
(7) Wing bolt for parallel guide
Technical data
Hand-held circular saw
Article number
Rated power input
No-load speed
Max. speed under load
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
Speed preselection
Constant electronic control
Temperature Dependent Overload Pro-
tection
Starting current limitation
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
1 609 92A 4LP | (28.01.2021)
(8) Clamping lever for mitre/bevel angle preselection
(9) Cut mark 0°
(10) Cut mark 45°
(11) Parallel guide
(12) Retracting blade guard
(13) Base plate
(14) Adjusting lever for retracting blade guard
(15) Chip ejector
(16) Protective guard
(17) Handle (insulated gripping surface)
(18) Hex key
(19) Clamping bolt with washer
(20) Clamping flange
(21) Circular saw blade
(22) Mounting flange
(23) Saw spindle
(24) Fastening screw for dust extraction adapter
(25) Dust extraction adapter
(26) Clamping lever for cutting depth preselection
(27) Cutting depth scale
(28) Wing bolt for mitre/bevel angle preselection
(29) Pair of screw clamps
(30) Guide rail
(31) Connector
(32) Extraction hose
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GKS 65
3 601 F67 0..
W 1600
-1
min 5900
-1
min 4200
mm 65
mm 48
●
–
–
–
–
mm 170 x 305
mm 190
mm 184
a)
a)
a)
a)
a)
a)
a)
GKS 65 G GKS 65 GCE
3 601 F68 9.. 3 601 F68 9..
1600
5900 2300–5000
4200 1400–4000
65
48
●
–
–
–
–
203 x 327
190
184
Bosch Power Tools
a)
1800
65
48
●
●
●
●
●
203 x 327
190
184