ANSI Z87.1 standard in the USAs or EN 166 in EU
countries.
•
Use gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
•
Use sturdy non-slip boots or shoes.
•
Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
•
Keep first aid equipment close at hand.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use a product with defective safety devices.
•
Do a check of the safety devices regularly. If the
safety devices are defective, speak to your Redmax
service agent.
1075 - 003 - 30.01.2021
Read the warning
To do a check of the throttle trigger lockout
1. Make sure that the throttle trigger lockout (A) and
throttle trigger (B) move freely and that the return
spring works correctly.
B
2. Push down the throttle trigger lockout and make sure
that it goes back to its initial position when you
release it.
3. Make sure that the throttle trigger is locked at the
idle position when the throttle trigger lockout is
released.
4. Start the product and apply full throttle.
5. Release the throttle trigger and make sure that the
blades stop and stay stationary.
WARNING:
when the throttle trigger is in the idle
position, then the carburetor idle speed
A
If the blades move
5