Publicidad
Idiomas disponibles
Idiomas disponibles
REQUIREMENT – Observe the instruction
Ensure that the operation process is adhered to and avoid accidents and
expensive down times due to improper use of machines, devices and tools.
By using the mandatory sign you refer to the adherence of operation
instructions.
NOTICE – Gives recommendations and important hints for handling the
product.
IMPORTANT – Indicates application advice and other particularly useful
information.
REMARK:
In each case the symbol used does not replace the safety text. The text must always be read
fully. In some cases other symbols will be used with the signal words.
Operating pressure
For screws up to
Max. Torque (hard thread)
Air connection
Air consumption in average
Noise pressure level L
Noise power level L
ATEX Classification
(1) Remark: Measurement acc. to DIN EN ISO 15744
(2) Remark: Measurement acc. to. DIN EN ISO
The performance data are guide values only, they depend basically on the application, the
operating pressure and the applied accessories.
The manufacturer machines are designed for commercial/industrial use only. Only trained,
skilled personnel are allowed to operate the machine. Impact wrenches are designed for
the tightening and loosening of screw fittings in a range of performance defined by the
manufacturer.
They have to be used in combination with appropriate:
- Power socket wrenches,
- extensions,
- joints,
- adapters.
It can be applied for:
- Mining.
TECHNICAL SPECIFICATION
Drive square
Torque
Weight
(1)
pA
WA
Vibration
(2)
28927-2
INTENDED USE
6 bar
1/2''
M20 (30 mm AF)
540 Nm
610 Nm
R 1/4'' female
0.32 m
/min
3
2.5 kg
90 dB (A)
101 dB (A)
2.6 m/s
I M2 Ex h I Mb T6
Measurement uncertainty K: 3 dB (A)
Measurement uncertainty K: 1.5 m/s
2
2
25
Publicidad
