NOTE: Follow these instructions for
best results.
• Place unit at least 2 feet (½ meter) from
the wall.
• Keep unit away from drafty areas.
• Keep curtains away from unit, as they
may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective film from the
control panel.
2. Compress tab and pull out back panel.
3. Remove bag from filters. Place filters
back in unit.
4. Insert Carbon Filter first and then True
HEPA Filter.
AIR PURIFIER SET-UP
5. Fully insert filter panel bottom tabs first,
6. Plug in the power cord to a wall outlet.
7. Turn unit on. Unit will beep.
6 6
then insert top tab until click is heard.
For approximately the first 4
minutes after turning the unit on,
the auto icon will flash while the unit
measures air quality.