Nevir NVR-5526 NVSD Manual De Instrucciones página 30

above the glass cover.
Replacing the light bulb
If the internal light does not work anymore, disconnect then reconnect at once the
device. If the light does not still work, verify if the light bulb is correctly screwed. If
despite these tests, there is no light, it is necessary to change the light bulb. Use a
220-240V~, MAX 10W light bulb.
⚫ Disconnect the appliance;
Open the light cover (1);
⚫
Undo the defective light bulb anticlockwise.
⚫
Screw the new light bulb clockwise.
⚫
12