Threading The Sewing Machine - Easy Home MD 17922 Manual Del Usuario

Operating instructions
6. Press the foot pedal
using batteries) to start winding.
7. Stop winding after the desired amount of thread is wound onto the
bobbin.
8. Push the bobbin winder pin and bobbin back to the right.
9. Remove the bobbin from the bobbin winder pin and then cut the thread.

Threading the sewing machine

1. Set the power OFF/speed
switch 6 to the "OFF"
position.
2. Raise the presser foot lifter
and turn the handwheel
counterclockwise until
the needle is in its highest
position.
3. Place a thread spool
the spool pin
that the thread rolls off the
spool in a counterclockwise
direction.
When needed, use the thread
spool pin foot
thread spool cap
4. Hook the thread through
the thread guide
and then securely slip it
counterclockwise under the
thread guide disk
18
29 (or set the power OFF/speed switch to "L" if you're
17
3
25 onto
14 , making sure
27 and/or
26 .
16
15 .
L OFF H