Samoa 366 060 Guía De Servicio Técnico Y Recambio página 7

TECHNICAL SPECIFICATIONS
TYPE
FUNCTIONS
MOIST PART MATERIALS
INLET CONNECTION
OUTLET CONNECTION
MAXIMUM WORKING PRESSURE
BURST PRESSURE
COMPATIBLE FLUIDS
FLOW
VISCOSITY RANGE
OPERATING TEMPERATURE
PRECISION
DISPLAY
MEASUREMENT UNITS
DISPLAY DIMENSIONS
DISPLAY VIEW ANGLE
DISPLAY RESOLUTION
POWER SUPPLY
CONSUMPTION
PULSE RATIO
PUSHBUTTON ACTUATION FORCE
WEIGHT
DIMENSIONS
(*) Working with high or low viscosity fluids, as well as very low (8 l/min) or very high flow rates, a calibration procedure
may be required.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
Oval gear meter
Partial meter, "Trip" meter, Total meter, change in the
measurement unit, calibration
Aluminium, Acetal, NBR, Stainless Steel
3/4" BSP
3/4" BSP
100 bar (1450 psi)
150 bar (2175 psi)
Oil, glycol and coolant solutions
1 to 80 l/min (0.25 to 21 gpm)
(depending on the viscosity of the fluid and temperature)
8 a 2000 cSt
-10 ºC to 60 ºC (14 ºF to 140 ºF)
±0,5% (*)
LCD with 5 digits and 2 decimal positions
Litres, gallons, quarters, pints.
20 x 41,5 mm (0.14" x 1.63")
170º
0,01 for litre, gallon and quarter units
0,02 for pint units
Two 1,5 V batteries, IEC LR03 / ANSI AAA
Rated operation: 1 mA
Standby mode: 10 µA
109 ppl
160 g (5.65 oz)
800 g (28.22 oz)
98 mm
(3.86")
93 mm
87 mm
(3.66")
(3.43")
R. 10/19 836 845
EN
7