Publicidad
Idiomas disponibles
Idiomas disponibles
3
4. Remove the old blade and replace it with a new one.
5. Place the washer on the blade.
6. Place the nut on the washer and tighten it
counterclockwise with the wrench provided.
Loosen
9.5
OPERATION TIPS
WARNING
Always hold the edger away from the body keeping
clearance between your body and the edger. Any contact
with the edger cutting head while operating can result in
serious personal injury.
•
Hold the edger with your right hand on the rear handle
and your left hand on the front handle.
•
Keep a firm grip with both hands while in operation.
•
Edger should be held at a comfortable position with the
rear handle about hip height.
•
The edger will edge along sidewalks, driveways, flower
beds, curbs, and similar areas.
•
Cut at a steady pace. If the blade begins to bog down, you
are edging too fast; slow your pace. Do not force the
blade into ground.
•
Light contact of the blade against the sidewalk edge,
curb, etc., is acceptable and will not damage the edger.
•
Best appearance is obtained when grass is dry. Avoid
edging in wet soil or wet grass areas or the blade guard
might clog and result in an uneven edge. If the blade
guard becomes clogged, stop the edger, remove the
battery, and remove debris from the blade guard.
English
2
1
10
Tighten
Read and understand the safety regulations and the
maintenance instructions before you clean, repair or do the
maintenance work on the machine.
4
Make sure that all nuts, bolts and screws are tight. Examine
regularly that you install the handles tightly.
Use only the replacement parts and accessories of the initial
manufacturer.
10.1
Only your dealer or approved service center can do the
maintenance that is not given in this manual.
Before the maintenance operations:
•
Stop the machine.
•
Remove the battery pack.
•
Cool the motor.
•
Store the machine in cool and dry place.
•
Use correct clothing, protective gloves and safety glasses.
10.2
•
Clean the machine after use with a moist cloth dipped in
neutral detergent.
9
MAINTENANCE
IMPORTANT
IMPORTANT
IMPORTANT
GENERAL INFORMATION
IMPORTANT
CLEAN THE MACHINE
EN
Publicidad
