MAINTENANCE
WARNING:
wait for all moving parts to stop, and remove the battery pack. Failure to follow these
instructions can result in serious personal injury or property damage.
WARNING:
other parts can create a hazard or cause product damage.
NOTICE: Before each use, inspect the entire product for damaged, missing, or loose
parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps
and do not operate this product until all missing or damaged parts are replaced. Please
contact customer service or a qualified service center for assistance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which can result in serious personal injury.
CLEANING THE POWER HEAD
1. Stop the motor and remove the battery pack.
2. Clean dirt and debris from the power head using a damp cloth with a mild
detergent.
NOTICE: Do not use any strong detergents on the plastic housing or the handle. They
can be damaged by certain aromatic oils such as pine and lemon, and by solvents such
as kerosene.
STORING THE POWER HEAD
1. Remove the battery pack from the power head before storing.
2. Clean all foreign material from the power head.
3. Store it in a place that is inaccessible to children.
4. Keep away from corrosive agents such as garden chemicals and de-icing salts.
22
56-VOLT LITHIUM-ION POWER HEAD — PH1400/PH1400-FC
Before inspecting, cleaning or servicing the unit, stop the motor,
When servicing, use only identical replacement parts. Use of any
Do not at any time let brake fluids, gasoline, petroleum-based