Descargar Imprimir esta página

Cameo CLF2FCPO Manual De Usuario página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
STAND-ALONE MODE PLAY LOOP (8-step color sequences 1 - 8)
Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
(SELECT) to select "Play Loop" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Now select one
of the 8 preset but customizable color sequences (loops) by rotating the left encoder. Confirm the selection by pressing the left encoder (ENTER).
The brightness (DIM) of the color loop can now be set using the left encoder, while the step duration (0.1 second to 21 minutes, with 2 random
modes) and fade times (0 seconds to 18 minutes, with 2 random modes) are configured using the center and right encoders respectively (see
illustration). The individual settings and the name of the color loops can be modified using the "Edit Loop" item in the main menu.
currently activated mode
Rotate encoder =
set brightness (DIM)
Press encoder =
select mode
STAND-ALONE MODE EDIT PLAY LOOP (Edit Loop)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to
select "Edit Loop" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). You can now select
one of the 8 color sequences (loops) by rotating the left encoder and then confirm the selection by pressing on the left encoder (ENTER).
Now enter a custom name of up to 12 digits to be assigned to the color loop (Edit Loop Name) by rotating the left encoder to a letter,
underscore or number for the first position of the preset name, confirming the selection by pressing on the left encoder. The second position
etc. is chosen in the same way. Once the preset name is complete, press the center encoder (Save&Next) to move to the next step of
editing. If you press on "Save&Next" without selecting a letter, underscore or number for the first position, then the previous preset name is
retained and you move immediately to the next step of editing.
Select Step 1 from the 8-step loop (Step1-Step 8) by rotating the left encoder to determine the color for the step (Step 1, note the selection
arrow). Now select one of the colors in the stand-alone mode "User Color" by rotating the center encoder and confirm the selection for Step
1 by pressing on the middle encoder. The selected color for the respective step is displayed visually in a box on a light background below
the color number 1 to 8. The same method is used to set the colors for steps 2 through 8. Close the process and save the loop by pressing
on the left encoder (ENTER).
Rotate encoder =
set step duration (t-Fade)
Press encoder =
return to color loop selection (Back)
Fan mode
Rotate encoder =
set fade time (t-Fade)
Press encoder =
Open main menu
11

Publicidad

loading

Este manual también es adecuado para:

F2 fc pole operatedF2 fc po