Descargar Imprimir esta página

Beurer BY 40 Basic Instrucciones De Uso página 22

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
8. Operation
8.1 Tips to ensure a better milk flow
• Choose a location to use the pump where you can relax.
• Choose a time to use the pump when you can relax.
• Having your child nearby or looking at a picture of your child can have a positive effect on the milk flow.
• If feeding your child using one breast, use the breast pump on the other breast at the same time.
• Warmth and relaxation encourage milk flow. Use the breast pump after having a shower or bath.
• If your breasts are swollen or sore, place a warm towel on them for a few minutes. This will improve the
milk flow.
• If the milk does not start to flow from your breasts immediately, try to relax and then try again a few min-
utes later.
• If the breast pump still does not extract any milk from your breasts after five minutes, stop using it and
try again later.
• If you experience any sharp pains when using the breast pump, consult a doctor.
8.2 Operating the breast pump
1. Before using the breast pump, wash your hands and breasts thor-
oughly.
2. Sit with your upper body lent forwards slightly. You can support
your back better by using a pillow.
3. Place the breast shield with silicone cushion gently on the breast.
Make sure that the nipple is completely enclosed and there are no
air pockets. To ensure proper function, the breast shield must be
drawn firmly onto the breast.
4. To switch on the breast pump, press the
pump will begin automatically in stimulation mode (
two-minute timer will appear on the display. During these two min-
utes, your breast nipple will be stimulated in order to prepare it for
pumping the breast milk. Use the
stimulation intensity.
5. After the two minutes have passed,
display. To begin pumping the breast milk, press the
Use the
/
fortable for you. When the milk reaches 180 ml inside the feeding
bottle, interrupt suction
/
buttons to select a suction intensity that is com-
button. The breast
) and a
buttons to set the desired
will start to flash on the
button.
22
1. switch on
stimulation
mode
2. itensity
3. start pumping
4. itensity

Publicidad

loading

Este manual también es adecuado para:

By 4095306