Beurer 95261 Instrucciones De Uso página 38

7.15 Setting the temperature alarm
Additionally, you can set a temperature alarm with an upper and lower limit�
If the current ambient temperature of the camera exceeds or falls short of
the set upper or lower limit, the parent unit will begin beeping�
To set the upper and lower limits for the temperature alarm, proceed as
follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
• Confirm using the ( OK ) button�
• Use the direction button (
"20" for the setting for the lower limit (range of 10 – 20°C)�
"40" for the setting for the upper limit (range of 20 – 40°C)�
• Use the direction buttons (
er limit�
• Use the direction button (
• Confirm using the ( OK ) button�
7.16 Setting the movement alarm
The baby monitor features a movement alarm� The movement alarm works
as follows: as soon as the camera of the baby unit registers movement, the
parent unit will begin to beep every 40 seconds�
To activate the movement alarm, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
• Confirm using the ( OK ) button�
7.17 Resetting to factory settings
To reset the parent unit back to factory settings, proceed as follows:
• Press the (
• Use the direction buttons (
) button�
) to select the upper or lower limit�
) to select the tick √�
) button�
) button�
) / ( ) to select the menu item
) / ( ) to select the menu item
) / ( ) to set your desired upper or low-
) / ( ) to select menu item
) / ( ) to select the "ON" field�
) / ( ) to select menu item
38
�
�
�
�