Let's Get Started!
Installation & Assembly Instructions for: M Series
Testing
Step 1:
• Do not use outdoors.
• Place the unit on a smooth level surface.
• Allow at least 12 -18 inches of clearance on all sides of the unit.
• Place the unit in a space where the temperature will not fall below 41 degrees Fahrenheit.
• The dehumidifier must be operated in an enclosed area to be most effective, such as a basement.
• Close all doors, windows, and other outside openings to the room.
Installation
Step 2:
There are two sizes of cabinet
Smaller cabinet size (WxHxD)
365mm x 500mm x 250mm
14.37in x 19.69in x 9.84in
For the smaller cabinet:
Before use, please remove the accessories from the bucket
1a.
Remove the bucket from appliance.
1b.
Open the cover, take out the accessories. (Fig 1a).
1c.
Reinstall the cover, correctly put the bucket back into the appliance (Fig 1b).
1a.
For the bigger cabinet:
Before use, please remove the accessories from the bucket
1a.
Remove the bucket from appliance. Note: Not all models have handles.
1b.
Make sure to release the cover by pushing in the two latches at the top of the bucket.
1c.
Open the cover, take out the accessories. (Fig 1a).
1d.
Reinstall the cover, correctly put the bucket back into the appliance (Fig 1b).
1a.
Bigger cabinet size (WxHxD)
383mm x 610mm x 280mm
15.08in x 24.02in x 11.02in
1b.
1b.
10