Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up your French Door Refrigerator
2. Disconnect two connectors (
side of the top cap, the one connector
(
) on right side door and the other
7
connector (
) on left side door. Remove
4
the tube (
) with pressing the dark gray
5
color part (
) of the water line coupler.
6
If a red clip is on the coupler, it must
be removed before removing the tube.
CAUTION
3. Remove the 3 hex head bolts (
left and right door hinges with a wrench(10mm).
With a Philips head screwdriver, remove the ground
screw (
) attached to the upper left and right door
8
hinges.
Remove the upper left and right door hinges (
4. Lift the door straight up to remove.
5. With a Philips head screwdriver, remove the screw (
attached to the lower left and right door hinges.
With a wrench(3/16"), remove the two hex head bolts (
attached to the lower left and right door hinges.
Remove the lower left and right door hinges (
10_ Setting Up
) at each
3
5
) attached to the upper
7
).
9
)
10
).
12
3
4
6
7
9
12
10
)
11
11
3
7
8
Publicidad
