Publicidad
Idiomas disponibles
Idiomas disponibles
Energy saver
This icon will light up when you activate the "Energy Saver" function. The Energy Saver function is automatically
set to "ON" when power is supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy
Saver function off.
Lighting
This icon will light up when you activate the "Lighting" feature. In this case, the dispenser light(under the
display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser,
turn the "Lighting" feature off.
alarm
This icon will light up when you activate the "Alarm" feature. The door alarm will sound if any door is open for
more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
ice off
This icon will light up when you activate the "Ice Off" feature. In this case, the ice will not be produced.
Lock
This icon will light up when you activate the "Lock" feature. In this case, you won't be able to use the control
panel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use the
control panel again.
usinG tHE ContRoL PanEL
Basic temperature of Freezer and Refrigerator Compartments
The basic temperature and recommended temperature of Freezer and Refrigerator Compartments are -2°F and
38°F respectively. If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the
temperature manually.
Controlling the Freezer temperature
The Freezer temperature can be set between 8°F and -8°F to suit your particular needs. Press the Freezer
button repeatedly until the desired temperature is shown in the temperature display. Keep in mind that foods like
ice cream may melt at 4°F. The temperature display will move sequentially from -8°F to 8°F. When the display
reaches 8°F, the temperature display goes back to -8˚F.
Controlling the Refrigerator temperature
The Refrigerator temperature can be set between 46°F and 34°F to suit your particular needs. Press the Fridge
button repeatedly until the desired temperature is shown in the temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting
towards the newly set temperature. This will be reflected in the digital display.
- The temperature of the Freezer, Refrigerator or Pantry Room may rise when you open the doors too frequently,
or if a large amount of warm or hot food is placed inside.
- This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their normal
set temperatures, the blinking will stop.
- If the blinking continues, you may need to "reset" the Refrigerator. Try unplugging the appliance, wait for around
10 minutes and then plug the power cord back in.
- The temperature of the Pantry Room may be a little different according to the location inside.
- If communication between Display and Main Controller errors, Pantry Display light may blink.
Once the communication return to their normal set temperatures, the blinking will stop.
If the blinking continues for a long period of time, please contact to Samsung Electronics Service Center.
Operating _23
Publicidad
