Publicidad
Idiomas disponibles
Idiomas disponibles
1. Start and select working mode
2. Setting room temperature
3. Setting flame
Turn the heater on by pressing the ON/OFF button on the control
panel or by pressing the Power button on the supplied remote
control.
When powering unit off, the heating element will stop working
first, the fan will continue working for 3min to allow heat to
dissipate from heater.
Select a heat setting.
Press the HEATER button to toggle between the three heat settings.
Press once for High Heat 1500W
Press again for low heat 1000W
Press again to turn off heat
Adjust the thermostat by pressing the arrows on the control panel
or button on remote control.
Set temperature indication varies from 59℉ to 95℉. Once you
have chosen the desired temperature, the heater will remain on
until the room temperature reaches the temperature on the digital
display. The heater will cycle on and off to maintain the desired
room temperature.
Adjust the flame brightness by pressing the flame image on the
control panel or button on remote control.
~ 8 ~
Publicidad
