KRESS KUS20P Manual De Instrucciones página 8

4. SPINDLE LOCK BUTTON
5. WHEEL GUARD FOR GRINDING
6. OUTER FLANGE
7. INNER FLANGE
8. SPINDLE
9. SPANNER
Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type KUS20P (S20P- designation of machinery,
representative of Angle Grinder)
Voltage
Power input
Rated speed
Protection class
Spindle thread
8
Disc size
Disc bore
EN
Machine weight
ACCESSORIES
Spanner
Auxiliary handle
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose the
type according to the work you intend to undertake.
Refer to the accessory packaging for further details.
Store personnel can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
KUS20P
230-240V~50/60Hz
1400W
9500/min
/II
M14
125 mm
22.2mm
2.0 kg
KUS20P
1
1
L =94,3 dB(A)
pA
L = 105,3 dB(A )
wA
3 dB(A)
VIBRATION
INFORMATION
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value
a
Surface grinding
h,AG
Uncertainty K = 1.5 m/s²
– The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one tool
with another;
– The declared vibration total value may also be used
in a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
To use the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimize your vibration exposure risk.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Intended Use
The machine is intended for cutting, roughing and
brushing metal and stone materials without using
water. For cutting metal, a special protection guard for
cutting (accessory) must be used.
= 8,14 m/s
2