Publicidad
Idiomas disponibles
Idiomas disponibles
2610051971.qxp_GDR18V-1400 GDX18V1600 2/11/19 9:07 AM Page 10
any assembly, adjustments or changing
accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
INSERTING AND REMOVING
ACCESSORIES
chuck by pulling on bit after it has been
inserted. The chuck accepts only standard
1/4" hexagonal shank accessories with
power groove.
Your tool is equipped with a Socket-Ready™
quick release chuck. The Socket-Ready™
chuck includes a 1/4" hex chuck designed for
impact ready bits and accessories.
When using the 1/4" hex chuck insert a bit or
accessory by simply pulling the locking sleeve
forward and inserting the desired accessory
into the chuck and release locking sleeve
(Fig. 2 and 3). To remove a bit or accessory,
pull locking sleeve forward and simply remove
it from the chuck.
(Model GDX18V-1600 only)
When using the 1/2" square drive, attach only
high quality impact ready accessories with the
proper size square drive designed for use with
impact wrenches. To install a socket, simply
push completely onto output drive (Fig. 3).
INTENDED USE
This tool is intended for the fastening and
loosening of bolts, nuts and various threaded
fasteners.
VARIABLE SPEED CONTROLLED
TRIGGER SWITCH
Your tool is equipped with a variable speed
trigger switch. The tool can be turned "ON" or
"OFF" by squeezing or releasing the trigger.
The speed can be adjusted from the minimum
to maximum nameplate RPM by the pressure
Assembly
Disconnect battery pack
from tool before making
To avoid loss of control,
ensure bit is locked in
Operating Instructions
FIG. 2
SCREWDRIVER BIT
BIT HOLDER
SCREWDRIVER BIT
FIG. 3
LOCKING
SLEEVE
SOCKET
OUTPUT
SCREWDRIVER
BIT
SCREWDRIVER BIT
you apply to the trigger. Apply more pressure
to increase the speed and release pressure to
decrease speed (Fig. 1).
BRAKE
When the trigger switch is released it
activates the brake to stop the chuck quickly.
This is especially useful in the repetitive
driving and removal of screws.
-10-
LOCKING
SLEEVE
CHUCK
DRIVE
BIT HOLDER
Publicidad
