CARLO GAVAZZI CA18FA Manual De Instrucciones página 26

6. IODD file and factory setting
6.1. IODD file of an IO-Link device
All features, device parameters and setting values of the sensor are collected in a file called I/O
Device Description (IODD file). The IODD file is needed in order to establish communication between
the IO-Link master and the sensor. Every supplier of an IO-Link device has to supply this file and make
it available for download on their web site. The file is compressed, so it is important to de-compress it.
The IODD file includes:
• process and diagnostic data
• parameters description with the name, the allowed range, type of data and address (index and
sub-index)
• communication properties, including the minimum cycle time of the device
• device identity, article number, picture of the device and Logo of the manufacturer
An IODD file is available on the Carlo Gavazzi Website: tbd
6.2. Factory settings
The Default factory settings are listed in appendix 7 under default values.
7. Appendix
7.1. Acronyms
DA
IntegerT
OctetStringT
PDV
R/W
RO
SO
SP
SSC
StringT
TA
UIntegerT
WO
26
Rev.00 - 02.2020 | CA18FA/CA30FA Capacitve sensors with IO-Link interface | © 2020 | CARLO GAVAZZI Industri
Dust Alarm
Signed Integer
Array of Octets
Process Data Variable
Read and Write
Read Only
Switching Output
Set point
Switching Signal Channel
String of ASCII characters
Temperature Alarm
Unsigned Integer
Write Only