Publicidad
Idiomas disponibles
Idiomas disponibles
RI function settings
1
2
3
(CD)
Linked D1
Linked LINE IN 1
(Tuner)
Linked D2
Linked LINE IN 2
SETUP
When connecting an Onkyo CD player or tuner to the RI
REMOTE CONTROL jack on this unit (p11) and using the
RI function, you need to make RI function settings.
1. Press SETUP on the remote controller.
0 If this unit is set to be used as a power amplifier, the
SETUP button will not work. Check the setting. (p19)
2. Press D/C on the remote controller several times to
switch to the RI function setting mode.
0 When connecting a CD player, make it so that one of the
"D1" and "LINE 1" indicators blinks and the other one
lights.
(BLINKING)
0 When connecting a tuner, make it so that one of the "D2"
and "LINE 2" indicators blinks and the other one lights.
(BLINKING)
3. Press B/A on the remote controller to switch the setting.
(When connecting a CD player)
- When connecting to the DIGITAL IN COAXIAL D1 jack
(default value): The "D1" indicator blinks and "LINE 1"
lights.
- When connecting to the LINE IN 1 jack: The "LINE 1"
indicator blinks and "D1" lights.
(When connecting a tuner)
- When connecting to the DIGITAL IN OPTICAL D2 jack
(default value): The "D2" indicator blinks and "LINE 2"
lights.
- When connecting to the LINE IN 2 jack: The "LINE 2"
indicator blinks and "D2" lights.
4. To exit the settings, press SETUP.
0 The setting mode ends after 5 seconds elapse with no
operations performed.
Preparations
/
/ /
(LIGHTING)
(LIGHTING)
15
En
Publicidad
