Publicidad
Idiomas disponibles
Idiomas disponibles
Operating other components
You can operate Onkyo CD players, tuners, network audio players, and RI docks with the remote controller of this unit.
∫ Operating an Onkyo CD player
Point the remote controller at the CD player's remote control
sensor and operate.
10.CD Í button
11.Play mode buttons
0 If you have a Network CD player, then the RI function
enables use of the < and > buttons when you connect it
with an RI cable (p11). When using these buttons, point
the remote controller at the remote control sensor of this
unit.
∫ Operating an Onkyo tuner, network audio
player, or RI dock
You can use the RI function to centrally control with the
remote controller of this unit by connecting this unit and the
other audio components with an RI cable (p11). Point the
remote controller at the remote control sensor of this unit to
operate.
12.Cursor buttons (D/C/B/A), ENTER button: Select items
with the cursor buttons and press ENTER to confirm.
13.Play mode buttons
0 When using a network audio player, pressing the
MENU button returns to the previous display/state
during setting.
14.INPUT button
0 When using a tuner, this works as a BAND button.
0 The INPUT button is not used for RI docks.
Before use
7
En
Publicidad
