Metra 99-7350B Instrucciones De Instalación página 3

ISO DIN head unit provisions
1. Clip the radio trim panel into the
climate control/vent panel
(Figure A)
2. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied.
(Figure B)
3. Slide the head unit into radio
brackets and secure with screws
supplied with the unit. (Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly
(Figure A)
99-7350B
(Figure B)
3
(Figure C)