Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: To make the first flow of steam come out,
when the 'on' indicator light (7) stops flashing, hold
the appliance horizontally and press the heating
plates all the way down about 5 times. During this
operation make sure that the steam activation button
(8) is fully pressed. Thereafter, steam will come out
every time the plates are pressed.
ATTENTION!
RISK OF SCALDING. When steam first
starts coming out, do not press the
heating plates without straightening
your hair to prevent drops of boiling
water from coming out.
ATTENTION! Do not press the
heating plates multiple times with the
appliance switched off or in stand-by
to prevent water from coming out.
ATTENTION!
RISK OF SCALDING. During use, take
care not to place the straightener too
close to your face, ears, neck or scalp.
1.
Take a thin, not large lock of hair between your fingers and place
it between the heating plates (9-10) starting from the roots.
2.
With one hand hold the lock taut and with the other slide the
straightener closed from the roots to the ends; you can use a
comb to do so.
3.
Repeat the same on every lock of hair.
NOTE: The holes where the steam comes out from must
always face downwards
4.
When all the locks are straight, turn the appliance off and unplug
it from the power socket.
5.
Let the appliance cool completely..
PLATE CLOSING SYSTEM
•
The straightener has a closing system.
•
To lock the two arms of the straightener in the closed position,
hold them together and press the plate lock (5) with the closed
17
EN
Publicidad
