Lenco MC-460BK Manual Del Usuario página 26

FM Radio
Select 'FM mode' from the main menu by using the navigation wheel or with the navigation
buttons on the remote. Press the navigation wheel to enter the FM radio mode. The FM mode
will start on 87.5MHz.
To save all stations with strong signal, press the navigation wheel, it will show "auto scan?"
choose YES. Then it will start auto scan. Once the auto-scan is complete, stations will be saved
in your favorites.
You will then be able to browse through these saved stations by holding down the '<' or '>'
buttons to skip between saved stations.
To manually scroll through FM frequency, simply press the '<' or '>' buttons to go backwards
or forwards through the frequency wave.
Pre-setting your favourite FM stations
To save presets manually, select and listen to the station frequency number for the station
you wish to save.
Press and hold the "PRESET" button on remote control for 1-2 secs and the number '01' will
display on the screen. Use the navigation knob to browse through preset numbers (up to 99)
and select the chosen preset number you wish to save it as by pressing the navigation wheel.
Recalling preset FM stations
View your favourite FM stations when you are on FM mode by simply selecting the 'PRESET'
button on remote control and begin scrolling through saved stations.
Use the „<" and „>" keys for searching radio stations. Use the right rotation knob or the
„<" and „>"keys for searching radio stations manually. One key press is equal to 0,05MHz.
Press the scan button, the radio will now begin to scan for all of the available digital radio
stations.
Once the scanning process has completed the radio will tune to the first available radio
station.
26