Lenco MC-460BK Manual Del Usuario página 19

Power Management
This option configures when the MC-460 should go into standby mode.
You can select Turn off/5 minutes/15 minutes/30 minutes.
When configured, the MC-460 will switch to standby when no music is
played for the configured time.
Use the Turn off setting to ignore the standby function.
Sleep Timer Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes.
Once the time is set, there will be a bed icon with the remaining minutes
at the top right corner of the display and the device will turn to standby
after the configured time.
(You also can use the Sleep button on the remote control to use this
function)
⚫
Internet Buffer: configure the buffer time of the music playback 2/4/8
Radio Seconds
⚫
Sound Quality: High or Low
Weather Activate/deactivate the weather forecast on the standby display. Choose
your preferred temperature unit (°F or °C) and then proceed by entering
your location. When activated, the weather forecast is shown in turns
with the clock display on the standby screen (it changes every 10 secs).
⚫
DAB/FM FM Mode: Set Mono or Set Stereo
Setup
⚫
FM Threshold
Seek Threshold: Strong, Default or Weak
Stereo Threshold: Strong, Default or Weak
⚫
DAB Threshold: Strong, Default or Weak
⚫
Service following(FM-IR): Enable or Disable
⚫
Service following(DAB-IR): Enable or Disable
Local Radio There is a shortcut Local Radio from the Internet Radio menu so that you
Setup can easily go to the station list of your location. You can setup your
location manually or let the system detect your current location. If you
choose to automatically detect your location, the system will detect the
location according to the IP address of your connected network. Press
Local Station to enter the local radio station list directly.
Playback Select the play mode of the media center. You can select: Off (no repeat
Setup or shuffle), Repeat all, Repeat one,or Shuffle.
19