Descargar Imprimir esta página

Lenco DIR-250 Manual Del Usuario página 29

Ocultar thumbs Ver también para DIR-250:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 184
There are three independent alarms – 2 alarms of absolute time setting (Alarm 1 and Alarm
2) and 1 alarm for relative time setting (NAP Alarm).
Select Alarm in the configuration menu or press the alarm button (12) on the front panel.
The first two alarms (Alarm 1 and 2): turn on alarm 1 or 2, then set the time and set it for
Everyday, Once or every specific day of week.
Then Select the (Alarm) time and set the respective values using the Navigate/OK knob on
the device or using the
button of remote control and switch to the next entry field
using the
Confirm or by pressing the ok button on the remote or the Navigate/OK knob
on the front panel.
Now choose 'Sound": to set the (alarm) sound to Beep, Melody or Internet Radio/FM/DAB
DAB+/USB.
An alarm symbol
will appear on the top of the display next to the time indicating that
the alarm is active
Note: if you choose the (alarm) sound Internet Radio/FM/DAB. You have to select a
previously stored 'Favorite' preset.
When the alarm source is set to internet Radio, the unit first has to connect to the internet.
Therefore there may be some delay. If no network is connected in one minute, the alarm will
automatically change to melody.
5.3.6
NAP Alarm:
Let's you do a little nap.
You can set, it for 5/10/20/30/60/90 or 120 minutes.
29

Publicidad

loading