Beko 01M-8808823200-0722-06 Manual Del Usuario página 9

3 Using the appliance
3.1 Use of the appliance
A B C
• Bring the lamp switch to position '0' to turn off
the lamp.
• Bring the lamp switch to position '1' to turn on
the lamp.
• Bring the motor switch to position '0' to turn off
the motor.
• You can operate the motor in the 1st speed level
minimum and in the 3rd speed level maximum
according to the density of cooking steam.
3.2 Energy efficient usage
• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
• The lamps on the hood are placed for illuminat-
ing the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
3.3 Operating the hood
• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
• You can start your appliance by pressing on the
desired speed setting button. (A, B, C).
• You may illuminate the cooking area by pressing
the lamp (D).
Cooker Hood / User Manual
3.4 Lamp replacement
D
Lamp
Power
Socket
Voltage
Dimension
ILCOS Code
Luminous flux
Correlated colour
temperature
This product contains a light source of energy ef-
ficiency class "E".
• Remove the aluminum cartridge filter. Remove
the faulty lamp and replace it with the one hav-
ing the same value.
A
MAX 3 W
3 W
E14
220 – 240 W
35x100 mm
DRBB/F-3-220-
240-E14-35/100
400 lm
2700 K
WARNING: Cut the power supply
of the hood. Lamps may burn your
hands while hot, so wait for them to
cool down.
9 / EN