Descargar Imprimir esta página

Imetec N0701 Instrucciones De Uso página 15

Plancha para pelo
Ocultar thumbs Ver también para N0701:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
on a smooth and heat resistant surface.
While straightening, be careful not to near the plates too much to
the sensitive parts of the face, ears, neck or head.
Leave the plates to cool down completely when finished, before
putting the appliance away.
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! DO NOT spray hairspray
while the appliance is switched on.
There is a risk of fire.
PREPARING YOUR HAIR
Wash hair as normal and comb to remove knots.
Dry your hair and brush from the roots to the ends.
INSTRUCTIONS FOR USE
Connect the plug (4) to the mains.
Press the button (1). The operating LED (2) lights up.
Select the desired temperature between 160°C and 230°C,
depending on the type of hair and the desired effect; the
temperature can be adjusted at any time from the slide button.
The operating LED (2) flashes until the plates reach the set
temperature.
Once the temperature is reached, the operating LED lights up
and remains on.
Take a thin lock of hair, which is the same width of the plate and
not too voluminous, and place it between the two plates.
Keep the lock of hair taut with one hand and slide the plate closed
with the other hand, from the roots down to the ends.
Once the hair is styled, switch the appliance off by sliding the
button (1) to 0° and disconnect the straightener from the socket.
USE
13
EN

Publicidad

loading