Klarstein 10031981 Manual De Instrucciones página 21

Power selected
When did not enter any models, pressing" 2 "to select the output power, the heater will work the full rated
output while" 7 "is displayed. Pressing" 3 "to switch to" 6 "heating mode. Or through high/low on the remote
control switch button" 12 "to choose the output power.
Wake-up function
The heater shows only area temperature on screen when in ready mode. You just touch (press) the screen
below the numbers, then it wakes up and you could control its functions.
The sound hint of key-press
Press any button there have buzzer ringing sound.
Safety feature
The unit is equipped with a high limit switch, the heater will automatically shut off if it is in an over-heating
condition. The heater will automatically turn back on when it has cooled down.
21